Detailed Product Description

HOT!!! Vehicle GPRS GPS Tracking system for Fleet Management S01M Feature & Functions:

3.1. Real-time Monitoring.
Because of the main communication of the system are GPRS and the Internet.
it makes GPS products can monitoring uninterrupted and implementation for
the second time in the car, GPS control center can achieve real-time traffic
monitoring.
3.2. GPS Orientation, GPS receiver will output a complete position.
3.3. Automatic Report Position/Status
Data content: vehicle status, ACC status, time, longitude latitude, speed,
direction, alarm information, petrol status.
a. Intelligent moving report (no less than 20 Seconds, no higher than 5000
seconds when in moving)
b. Intelligent stopping report (Automatic at every 3 minutes when stopping).
3.4. Engine running time recording(Triggered by 6-16 volt input, Can record the
time up to 99999 hours. exact to seconds.),
3.5. History data store even power off.
The device with a memory chip to store up to 500 messages even GPRS
network unavailable and system can not send message to server.
3.6. History Playback.
You can Replay the track of the car what and when do you want to know
include moving route, speed, time.
GPS/GPRS VEHICLE TRACKING SYSTEM Operating Instruction
3.7. Remote modify vehicle setup,
3.8. Automatic keeps GPRS alive.
3.9. Speeding Report.
When vehicle is out of predefined speed, a report will be generated on the
control center immediately.
3.10. Domain name setting
3.11. Geo-fence.
When UNIT is out of these predefined zones, a report will be generated. You
can set up 3 Geo-fences for every car.
3.12 Cut off power & gas supply.
Input the password and then click stop car.(default password: 123456, when
you try to stop the car, you need to change the default password first.)
3.13 Emergency Help. With a emergency button to call control center when
accident is befell. When you need help please press the emergency switch for
3 seconds.
3.14 Power Off and Wire Cut-off Report.
If the power is off or the wire of mainframe is cut off, this device will report to
control center.
3.15 Speaker& monitor (optional)Product Components

3.16 Petrol monitoring (optional)
There is one petrol sensor to connect with the oil meter, the oil consumption
record will save in the server, and you can see the total amount petrol on the
software at percent.
3.17 Main power pressure monitoring (optional)
If the main power pressure below DC12 V, an alert will be generated.

1 of Mainframe, 1 of Relay, 1 set of GSM/GPRS antenna, 1 set of GPS antenna
1 of Emergency button , 1 set of Power cords, 1 sets of Monitoring center software, 1 of Operation Manual